Base Coats & Adhesives
Polymer-modified cementitious and acrylic base coats and adhesives used to embed mesh, attach EPS foam shapes, and bond AkroFlex EIF Systems — including FoamTek, CI-Base, DryBond, StyroGlue, StyroBond and StyroAdmix.
9 products in this category
FoamTek
Polymer-modified cementitious adhesive and base coat for architectural EPS foam shapes.
CI-Base
Polymer-modified cementitious base coat for embedding mesh in the Omega Crack Isolation System.
DryBond
Polymer-modified cement adhesive and base coat for EPS foam shapes and leveling.
StyroGlue DryBond
Premium polymer-modified cement adhesive and base coat for AkroFlex EIF Systems and EPS foam.
StyroGlue Base
100% acrylic base coat and adhesive — field mixed 1:1 with portland cement for AkroFlex EIFS.
StyroGlue TF Base
Non-cementitious, fiber-reinforced, tintable acrylic base coat — no cement mixing required.
StyroGlue Plus Base
Acrylic, fiber-reinforced, water-resistant base coat and adhesive — doubles as a secondary water barrier.
StyroBond Adhesive
Non-cementitious, 100% acrylic adhesive that bonds EPS foam to wood-based sheathing — no cement needed.
StyroAdmix
Acrylic admix that turns leftover AkroFlex or OmegaFlex finish into an economical adhesive and base coat.